Toro Groundsmaster 3300 Series, Operator'S Manual

Page: 35 / 68

g258473
Figure 30
1. T
RANSPORT
position
2. S
ERVICE
position
Rotating the Cutting Unit to the
S
ERVICE
Position
Perform this procedure to rotate the cutting unit from
the T
RANSPORT
position to the S
ERVICE
position.
WARNING
If you leave the key in the switch, someone
could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the switch and do not
start the engine with the cutting unit in the
S
ERVICE
position.
1. Park the machine a level surface.
2. Press the lift switch to raise the cutting unit to
the T
RANSPORT
position.
3. Engage the parking brake, shut off the engine,
and remove the key.
4. Remove the pins from the height-of-cut plates
(
Figure 31 ).
g258474
Figure 31
1. Height-of-cut pins 2. Height-of-cut plates
5. Rotate the cutting unit ( Figure 32 ) so that the
latch engages with the tie-down bracket ( Figure
33 ).
WARNING
The cutting unit is heavy.
Use assistance when you lift the cutting
unit.
g298275
Figure 32
35