Diagnostics (cont'd.)
Menu Item
Description
D
ECK
Indicates if the cutting unit
inputs/outputs are active.
PTO
Indicates if the PTO is active.
E
NGINE
Indicates if the engine
inputs/outputs are active.
About
Menu Item
Description
M
ODEL
Lists the model number of the
machine.
SN
Lists the serial number of the
machine.
S/W R
EV
Lists the software revision of
the master controller.
Understanding the Display-Screen
Icons
Refer to the following table for a description of each
display-screen icon:
Display-Screen Icons
Engine speed
Engine fault
Hour meter
Air intake heater is active
Operator must sit in seat
Parking brake is engaged
Neutral
PTO is engaged
PTO is disabled
Indicates when the cutting units are
being lowered
Indicates when the cutting units are
being raised
PIN passcode
Display-Screen Icons (cont'd.)
Battery
Coolant temperature
Reset-standby regeneration request
Parked or recovery regeneration
request
A parked or recovery-standby
regeneration is processing.
High exhaust temperature
NOx control diagnosis malfunction;
drive the machine back to the shop
and contact your authorized Toro
distributor.
Accessing the Protected Menus
Note:
The factory default PIN code for you machine
is “1234”.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1.
Select the S
ETTINGS
option.
2.
Select the P
ROTECTED
M
ENUS
option.
3.
To enter the PIN code, press the display-screen
button until the appropriate digit appears, then
quickly press the display-screen button twice to
move to the next digit.
4.
After all four digits are entered, press the display
button once to submit the PIN code.
If the PIN code has been entered correctly, the
PIN icon will appear at the top right of all menu
screens.
29
