11
2
1
Figure 7
1.
Left hopper mounting
bracket
2.
Air cleaner assembly
Steps 7 thru 10 are used only on GM1000L and GM 228
traction units.
7. Using dimensions shown in figure 8, locate, mark and
cut a notch in left and right hopper mounting brackets.
2
1
1.50”
1.06”
1.75”
Figure 8
1.
Left hopper mounting
bracket
2.
Right hopper mounting
bracket
8. Using mounting holes in left side of frame, secure left
hopper mounting bracket to frame with (4) 5/16 – 18 x
1–1/4” capscrews and locknuts (Fig. 9). Notch in
bracket to fit around hood latch.
1
Figure 9
1.
Left hopper mounting
bracket
2.
Hood latch
9. Secure top of right hopper mounting bracket to right
side of machine with (2) 3/8–16 x 1” lg. capscrews and
3/8” lockwashers (Fig. 10). Notch in bracket to fit
around hood latch.
1
2
Figure 10
1.
Right hopper mounting
bracket
2.
Coupler bracket
10. Secure bottom of bracket and coupler bracket to frame
with (2) 3/8–16 x 1” lg. capscrews and locknuts
(Fig. 10).
11. Position rear hopper bracket on rear frame, as shown in
figure 11, aligning (2) bottom mounting holes with
holes in frame. Using bracket as a guide, locate, mark
and drill the remaining (2) 9/16” dia. holes in rear
frame.
12. Mount top of rear hopper bracket to frame using (2)
1/2–13 x 1–1/4” Ig. capscrews, mounting strap and (2)
1/2 – 13 locknuts (Fig. 11). Strap to be positioned
between frame and bracket.
Summary of Contents for Groundsmaster 200 Series
Page 19: ...19...
