4.
Loosely install the chute-cable bracket on the
frame near lift-arm assembly.
g329113
Figure 9
1.
Carriage bolt (5/16 x 4
inches)
3.
Nut (5/16 inch)
2.
Chute-cable bracket
4.
Lift-arm assembly
5.
Remove the shoulder bolt, washer, and nut
securing the linkage to the lift-arm assembly.
Discard the washer.
g330428
Figure 10
1.
Nut
3.
Shoulder bolt
2.
Washer
6.
Route the chute cable between the chute and
the chute post.
g334147
Figure 11
7.
Use the shoulder bolt and nut to install the chute
cable to the lift-arm assembly. Torque the bolt
98 to 119 N∙m (72 to 88 ft-lb).
Note:
When you remove the snowthrower from
the machine, remove the fasteners securing the
cable to the cable plate shown in
. Do
not remove the cable plate from the linkage and
lift-arm assembly.
g329114
Figure 12
1.
Nut
4.
Cable plate
2.
Chute cable
5.
Shoulder bolt
3.
Remove these fasteners
when removing the
snowthrower.
8
