5
Installing the Snowthrower
Parts needed for this procedure:
1
Snowthrower attachment
2
Stop block
1
Chute-cable bracket
2
Carriage bolt (3/8 x 1-1/2 inches)
1
Carriage bolt (5/16 x 4 inches)
2
Nut (3/8 inch)
1
Nut (5/16 inch)
2
Washer
Procedure
1.
Install the attachment tube to the accessory
frame receiver. Secure it using the hitch pin and
hairpin cotter in the front hole of the frame.
g329038
Figure 6
1.
Hitch pin
3.
Hairpin cotter
2.
Accessory frame
4.
Attachment tube
2.
Install the 2 stop blocks.
g329039
Figure 7
1.
Carriage bolt—3/8 x 1-1/2
inches (2)
3.
Nut—3/8 inch (2)
2.
Stop block (2)
3.
Secure the strut assembly to the frame using the
fasteners removed from the mower strut bracket
and 2 washers.
g340719
Figure 8
1.
Carriage bolt—3/8 x 2-1/4
inches (2)
3.
Washer (2)
2.
Strut assembly
4.
Nut—3/8 inch (2)
7
