Servicing the Fuses
The electrical system is protected by fuses. It requires no
maintenance; however, if a fuse blows check the component
and circuit for a malfunction or short.
The fuses are located on right console next to the seat (
1.
To replace the fuses, pull out the fuse to remove it.
2.
Install a new fuse (
).
Figure 59
1.
Optional accessory— 15A
4.
Main— 25A
2.
Charge— 25A
5.
Console
3.
PTO— 10A
Drive System
Maintenance
Checking the Seat Belt
Service Interval:
Before each use or daily
Inspect the seat belt for wear, cuts, and proper operation of
the retractor and buckle. Replace the seat belt if it is damaged.
Checking the Rollover
Protection System (ROPS)
Knobs
Service Interval:
Before each use or daily
WARNING
To avoid injury or death from rollover: keep the roll
bar in the fully raised locked position and use the
seat belt.
Ensure that the seat is secured to the machine.
Check that both the mounting hardware and the knobs are in
good working condition. Make sure that the knobs are fully
engaged with the ROPS in the raised position. The upper
hoop of the roll bar may need to be pushed forward or pulled
rearward to get both knobs fully engaged.
42
