Servicing the Air Cleaner (continued)
G357261
2.
Remove the wing nut
that secures the air-
cleaner cover to the air cleaner and remove
the cover
. Clean the cover thoroughly.
3.
Remove the wing nut
from the air filter and
remove the filter.
4.
Remove the foam filter
from the paper filter
.
5.
Inspect both air-filter elements and replace
them if they are damaged.
Note:
Always replace the paper air-filter
element at the scheduled interval.
6.
Clean the foam element as follows:
A. Wash the foam element in a solution of
liquid soap and warm water.
Note:
Squeeze to remove dirt, but do not
twist the element because the foam may
tear.
B. Dry the element by wrapping in a clean
rag. Squeeze the rag and foam element to
dry, but do not twist the element because
the foam may tear.
C. Saturate the element with clean engine oil.
Squeeze element to remove excess oil
and to distribute oil thoroughly.
7.
Clean the paper element by tapping the filter
element several times on a hard surface or
blow compressed air (not exceeding 2.07 bar
(30 psi)) through the paper element from the inside.
Note:
Never try to brush off the dirt; brushing the paper element will force the dirt into
the fibers.
8.
Install the foam element, paper element, and air-cleaner cover.
Engine Oil Service
Engine Oil Specifications
Crankcase capacity:
1.1 L (1.16 US qt)
Oil type:
API classification SJ or later.
Oil viscosity:
Selected the oil viscosity according to ambient temperature in
the table below.
Over 13° C (40° F)
SAE 30 or 10W30
Below 13° C (40° F)
SAE 20 or 10W30
Maintenance: Engine Maintenance
Page 5–7
3451-702 A
Summary of Contents for 68038
Page 56: ...Notes...
Page 57: ......