Toro 68038, Operator'S Manual, Page: 27 / 57

Operating the Hopper (continued)
g025722
2. Dump the hopper by either of the following:
• Pull the dump handle down.
• Press down on the forward part of the dump
pedal
.
3. Move the hopper to the upright position by
either of the following:
• Push the dump handle up.
• Press down on the rear part of the dump
pedal
.
After Operation
After Operation Safety
General Safety
• Engage the parking brake, shut off the engine, remove the key (if applicable), and wait
for all movement to stop before adjusting, cleaning, or repairing the machine.
• Do not touch parts that may be hot from operation. Allow them to cool before attempting
to maintain, adjust, or service the machine.
• Clean debris from drives, mufflers, and the engine to help prevent fires. Clean up oil or
fuel spills.
• Use care when loading or unloading the machine into a trailer or truck.
Haul the Machine
Use a heavy-duty trailer or truck to haul the machine. Use a full-width ramp. Ensure that the
trailer or truck has all the necessary brakes, lighting, and marking as required by law. Please
carefully read all the safety instructions. Knowing this information could help you or
bystanders avoid injury. Refer to your local ordinances for trailer and tie-down requirements.
3451-702A Page 4–10 Operation: After Operation