Toro 68038, Operator'S Manual, Page: 34 / 57

Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
Yearly or before
storage
Touch up chipped paint.
361-9 1 Paint
361-10 1 Paint
Pre-Maintenance Procedures
Moving a Non-Functional Machine
In an emergency, you can move the machine forward by actuating the bypass valve in
the hydraulic pump and pushing or towing the machine.
IMPORTANT
Do not tow or pull the machine without bypassing the parking brake or you will
damage the hydraulic system.
G357878
1. Place the hopper in the dump position and
remove the cowl.
2. Rotate the bypass valve counterclockwise to
tow the machine.
3. Tow the machine as required using the tie
down locations.
IMPORTANT
Do not push or tow the machine faster than 3 to 4.8 km/h (2 to 3 mph) for longer than 3
minutes, because you may damage the transmission. The bypass valves must be
open whenever you push or tow the machine.
4. Rotate the bypass valve clockwise to operate the machine normally.
Lifting the Machine
Lifting the Machine with a Hoist
Ensure that the hopper is empty before lifting the machine.
Maintenance: Pre-Maintenance Procedures Page 5–3 3451-702 A