12
Setup
Note:
Determine the left and right sides of the machine from the normal operating position.
To use the sprayer,
you must obtain and install a boom kit and nozzles
. Contact your Authorized Toro Distributor for
information on the available boom kits and accessories. After you install your booms and nozzles and before using the
sprayer for the first time, adjust the boom bypass valves so that the pressure and application rate remains the same for all
booms when you turn one or more booms off. Refer to Adjusting the Boom Bypass valves, page 26.
Caution
Without a boom kit installed, the sprayer may spray chemicals out of the boom valves, possibly
injuring bystanders or causing property damage.
Do not run the sprayer without a boom kit and nozzles installed.
Loose Parts
Note:
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
90 degree fitting
Quick coupler
Hose adapter
Fill receptacle bracket
Flange-head bolt, 5/16 x 3/4 inch
Anti-siphon hose
1
1
1
1
1
1
Install the anti-siphon fill receptacle.
Spray Pro Monitor
Bracket
Flange-head bolt, 3/4 inch
Flange nut, 1/4 inch
Knob
Washer
Carriage bolt
1
1
2
2
2
2
2
Install the Spray Pro monitor.
Key
2
Use in the ignition switch.
Operator’s Manual
Engine Operator’s Manual
1
1
Read before operating the machine.
Operator Video
1
Watch before operating the machine.
Parts Catalog
1
Use for ordering replacement parts.
Registration Card
1
Complete and return to Toro.
Predelivery Inspection Form
1
Complete and file in your customer history portfolio.
Summary of Contents for 41165
Page 51: ...51...
