Toro 38657, Operator'S Manual

Page: 6 / 32

Briggs Part No. 276925
1. Warning—read the
Operator’s Manual.
3. Warning—toxic gas
inhalation hazard.
2. Warning—fire hazard.
4. Warning—hot
surface/burn hazard.
Briggs Part No. 277566
1. When starting a cold
engine, close the choke
and press the primer two
times. 2. When starting a warm
engine, open the choke
and do not press the
primer.
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Handle bolts 4
Curved washers 4
1.
Locknuts 4
Install the upper handle.
2.
No parts required
–
Install the wheel clutch cable ends
3.
No parts required
–
Install the traction control linkage.
Carriage bolts 2
4.
Locknuts 2
Install the chute control rod.
5.
Cable tie 1 Connect the wire to the headlight.
6.
No parts required
–
Fill the engine with oil.
7.
No parts required
–
Check the tire pressure.
8.
No parts required
–
Check the skids.
9.
No parts required
–
Check the operation of the traction drive.
6