Figure 16
1.
Cable clip
2.
Deflector cable
7. Hold the blue trigger cap down and rotate the Quick
Stick in a circle to ensure that the chute and deflector
operate smoothly.
5
Connecting the Wire to the
Headlight
Parts needed for this procedure:
1
Cable tie
Procedure
Models 38633, 38637, and 38639 only
1. Insert the wire connector on the loose end of the
wire straight into the back of the headlight until it is
securely in place (Figure 17).
Figure 17
1.
Plastic clip on wire
connector
3.
Cable tie
2.
U-bolt
Note:
Ensure that the plastic clip on the wire
connector is on the bottom (Figure 17).
2. Secure a cable tie (from the loose parts bag) around
the wire and the handle about an inch (2.5 cm) below
the U-bolt (Figure 17).
6
Filling the Engine with Oil
No Parts Required
Procedure
Your machine comes with oil in the engine crankcase.
Note:
Before starting the engine, check the oil level
and add oil if necessary.
Use automotive detergent oil with an API service
classification of SF, SG, SH, SJ, SL, or higher. Refer to
your engine owner’s manual.
Use Figure 18 below to select the best oil viscosity for
the outdoor temperature range expected:
Figure 18
1.
Using SAE 30 at outdoor
temperatures below 40°F
(4°C) will result in hard
starting.
2.
Using 10W-30 at outdoor
temperatures above
80°F (27°C) may result in
increased oil consumption;
therefore, check the oil
level more frequently in
these circumstances.
Engine Oil Capacities
11
Summary of Contents for 38597
Page 29: ...Notes 29 ...
Page 30: ...Notes 30 ...
