g350418
Figure 10
1.
Capscrew (1/2 x 4-1/2
inches)
4.
Flange locknut (1/2 inch)
2.
Floor panel
5.
Thick washer (1/2 x 2-1/4
x 3/8 inch)
3.
Thin washer (1/2 x 1-3/8
inch)
Installing the Light Mounts to the
Machine
Machines with a Roll Bar
1.
Assemble the light mount to the floor panel and
frame of the machine with the capscrew (1/2 x
4-1/2 inches), thin washer (1/2 x 1-3/8 inch),
thick washer (1/2 x 2-1/4 x 3/8 inch), and flange
locknut (1/2 inch) that you removed in
the Floor Panel Hardware (page 6)
.
g350530
Figure 11
1.
Capscrew (1/2 x 4-1/2
inches)
4.
Thick washer (1/2 x 2-1/4
x 3/8 inch)
2.
Thin washer (1/2 x 1-3/8
inch)
5.
Flange locknut (1/2 inch)
3.
Light mount (machines
with a cab)
2.
Torque locknut and capscrew and locknut to 91
to 113 N∙m (67 to 83 ft-lb).
3.
Repeat steps
and
for the light mount at the
other side of the machine.
Assembling the Headlights
Machines with a Cab
Important:
Ensure that you assemble the
headlight marked left and the left light mount,
and the headlight marked right and the right light
mount.
1.
If assembled, remove the locknut (12 mm) and
lock washer (12 mm) from the capscrew in the
headlight bracket.
2.
Align the light to the light mount as follows:
7
Summary of Contents for 31693
Page 31: ...Notes ...
Page 32: ......
