Toro 31693, Installation Instructions Manual

Page: 17 / 32

2. At the upper 6.4 mm (1/4 inch) holes, assemble
2 carriage bolts bolt (1/4 x 2 inches) through the
switch plate and the other bracket mount (
Figure
32 ).
3. Assemble the fuse mount plate to the upper
bracket mount and carriage bolts (
Figure 33 )
with 2 flange locknuts (1/4 inch).
g350772
Figure 33
1. Bracket mount 4. Fuse mount plate
2. Carriage bolt (1/4 x 2
inches) 5. Flange locknut (1/4 inch)
3. Switch mount
4. At the lower 6.4 mm (1/4 inch) holes, assemble
2 carriage bolts bolt (1/4 x 2 inches) through the
switch plate, bracket mount, and fuse mount
plate (
Figure 33 ) with 2 carriage bolts (1/4 x 2
inches) and 2 flange locknuts (1/4 inch).
5. Align the switch plate to the operator’s seat, and
tighten the 4 flange locknuts.
Connecting the Console Harness
to the Switches
1. Plug the 8-socket connector of the control
harness labeled H
AZARD
S
WITCH
into the 8-pin
connector of the rocker switch ( Figure 34 ).
g350776
Figure 34
1. 8-pin connector (rocker
switch) 2. 8-socket connector
(labeled H
AZARD
S
WITCH
—console
harness)
2. Plug the 9-pin connector of the multi-function
switch harness into the 9-socket connector of
the console harness (
Figure 35 ).
g350777
Figure 35
1. 9-pin connector
(multi-function switch
harness) 2. 9-socket connector
(console harness)
3. Secure the console harness to the steering
column with 2 cable ties.
Installing the Control Cover
1. Align the holes in the control cover to the holes
in the switch mount (
Figure 36 ).
17