Toro 31693, Installation Instructions Manual

Page: 2 / 32

Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Disconnect the battery.
Reflector decal (front—yellow) 2
3
Reflector decal (back—red) 2
Install the front reflector decals.
Right headlight—Part No. 140-6772
(light, mount, washer, and nut)
1
Left headlight—Part No. 140-6773
(light, mount, washer, and nut)
1
Light mount (machines with a roll bar) 2
Left light mount (machines with a cab) 1
Right light mount (machines with a cab) 1
Flange-head capscrew (1/2 x 1 inch) 2
Flange Locknut (1/2 inch) 2
4
Cable tie
2
Assemble the headlights to the brackets.
Console harness 1
Cap plug 1
Fuse mount plate 1
Clip nut (#10) 1
Flasher 1
Flange head screw (#10 x 3/8 inch) 1
Cable tie 1
Bracket mount 2
Clip nut (1/4 inch) 8
Switch mount 1
Multi-function switch 1
Switch clip (thick) 1
Switch clip (thin) 1
Switch plug 3
Rocker switch 1
Knob 2
Fuse cover 1
Bolt retainer 2
Carriage bolt (1/4 x 2 inches) 4
Flange locknuts 4
Cable ties 2
Push-in fastener 2
5
Flange-heads screw (1/4 x 3/4 inch) 4
Install the control console.
6
No parts required
–
Connect the console harness.
Fuse (10 A) 1
7
Fuse (15 A) 1
Install the fuses.
2