Toro 31693, Installation Instructions Manual

Page: 29 / 32

2. Rotate the light switch ( Figure 63 and Figure 64 )
to the following positions:
•
O
FF
•
Road lights O
N
•
Road lights and optional work light O
N
Using the Turn Signal
•
Move the turn signal switch ( Figure 63 ) up to
signal a right turn.
•
Move the switch down to signal a left turn.
•
Move the switch to the middle position to shut off
the turn signals.
Using the Hazard Lights
g351460
Figure 65
1. Hazard switch
•
Press the top of the switch ( Figure 65 ) to run the
hazard lights..
Note:
The hazard switch illuminates when
running the hazard lights.
•
Press the bottom of the switch to shut off the
hazard lights.
Adjusting the Headlights
1. Loosen the mounting locknuts and capscrews to
adjust the lights (
Figure 62 ).
g351458
Figure 66
1. Capscrew (horizontal light
adjustment) 3. Locknut and capscrew
(vertical light adjustment)
2. Locknut (horizontal light
adjustment)
2. Adjust the lights per local standards.
3. Tighten the locknuts and capscrews ( Figure 62 ).
29