4.
Repeat steps
through
for the other red
reflector decal.
4
Assembling the Headlights
to the Brackets
Parts needed for this procedure:
1
Right headlight—Part No. 140-6772 (light, mount,
washer, and nut)
1
Left headlight—Part No. 140-6773 (light, mount,
washer, and nut)
2
Light mount (machines with a roll bar)
1
Left light mount (machines with a cab)
1
Right light mount (machines with a cab)
2
Flange-head capscrew (1/2 x 1 inch)
2
Flange Locknut (1/2 inch)
2
Cable tie
Identifying the Headlights
At the bracket side of the headlight, look at the
information printed on the housing (
). Note
the part number and the “RH” or “LH” information.
g350385
Figure 7
Identifying the Headlight Mounts
Use
and
to identify the headlight
mounts for your machine.
g350863
Figure 8
Machines with a Roll Bar
1.
Light mounts
g350864
Figure 9
Machines with a Cab
1.
Left light mount
2.
Right light mount
Removing the Floor Panel
Hardware
Machines with a Roll Bar
Remove the 2 capscrews and 2 thin washers, 2 thick
washers, and 2 flange locknuts that secure the front of
the floor panel to the frame of the machine (
).
Note:
Retain the hardware.
6
Summary of Contents for 31693
Page 31: ...Notes ...
Page 32: ......
