•
Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be
relieved by stopping the engine and lowering the cutting
units and attachments to the ground.
•
Check all fuel lines for tightness and wear on a regular
basis. Tighten or repair them as needed.
•
If the engine must be running to perform a maintenance
adjustment, keep your hands, feet, clothing, and any parts
of the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
•
To ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer. The maximum governed engine speed
should be 3,000 rpm.
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
To ensure optimum performance and continued safety
certification of the machine, use only Toro replacement
parts and accessories. Replacement parts and accessories
made by other manufacturers could be dangerous, and
such use could void the product warranty.
Sound Power Level
This unit has a measured sound power level of 105 dB(A),
which includes an Uncertainty Value of 1 dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.
Sound Pressure Level
This unit has a sound pressure level at the operator’s ear of 91
dB(A), which includes an Uncertainty Value (K) of 3 dBA.
Sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.
Vibration Level
Hand-Arm
Measured vibration level = 1.3 m/s
2
Uncertainty Value (K) = 0.7 m/s
2
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.4 m/s
2
Uncertainty Value (K) = 0.2 m/s
2
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
7
