111-5007
1.
Tipping hazard—slow machine before turning.
2.
Tipping hazard—operate on slopes less than 20 degrees, do not operate on slopes greater than 20 degrees.
3.
Tipping hazard—always wear the seat belt when a roll over protection system (ROPS) is in use, do not wear a seat belt when
the ROPS bar is lowered.
4.
Warning—read the
Operator's Manual
, remove the ignition key before performing any maintenance.
5.
Thrown object hazard—keep bystanders a safe distance from the machine.
111-9649
1.
Read the
Operator's Manual
for more information on service
and maintenance.
8.
Ensure the blades stop when you leave the operating position.
2.
Tire pressure—1 bar (14.5 psi)
9.
Check the air filter.
3.
Check all fasteners.
10.
Inspect the blades for wear.
4.
Check for hydraulic leaks.
11.
Ensure the bottle is filled to the low line.
5.
Check the transmission-oil level.
12.
Clean the cooling system.
6.
Check the fuel level.
13.
Clean the machine and torque the front wheel to 200 N∙m
and the rear wheel to 54 N∙m.
7.
Check the oil level.
11
