Toro 30643, Operator'S Manual

Page: 33 / 72

Settings
Menu Item Description
Units Controls the units used on the
InfoCenter; the menu choices
are English or Metric
Language
Controls the language used
on the InfoCenter*
LCD Backlight Controls the brightness of the
LCD display
LCD Contrast Controls the contrast of the
LCD display
Protected Menus Allows the distributor/engineer
to access protected menus by
inputting a passcode
Auto Idle
Controls the amount of time
allowed before idling the
engine when the machine is
not in use
Mow Speed Controls the maximum speed
while in mow (low range)
Trans Speed Controls the maximum speed
while in transport (high range)
Smart Power Smart Power prevents
bogging down in heavy turf by
automatically controlling the
machine speed and optimizing
cutting performance.
*Only "operator-faced" text is translated. Faults, Service, and
Diagnostics screens are "service-faced." Titles will be in the
selected language, but menu items are in English.
About
Menu Item Description
Model Lists the model number of the
machine
SN Lists the serial number of the
machine
Machine Controller Revision Lists the software revision of
the master controller
InfoCenter Revision Lists the software revision of
the InfoCenter
CAN Bus Lists the machine
communication bus status
Protected Menus
There are 4 operating configuration settings that are adjustable
within the Settings Menu of the InfoCenter: auto idle time
delay, maximum mowing ground speed, maximum transport
ground speed, and Smart Power. These settings are in the
Protected Menu.
Accessing the Protected Menu Settings
1. From the Main Menu, scroll down to the Settings
Menu and press the right button.
2. In the Settings Menu, scroll down to the Protected
Menu and press the right button.
3. To enter the passcode, use the center button to set
the first digit, then press the right button to move on
to the next digit.
4. Use the center button to set the second digit, then
press the right button to move on to the next digit.
5. Use the center button to set the third digit, then press
the right button to move on to the next digit.
6. Use the center button to set the fourth digit, then press
the right button.
7. Press the middle button to enter the code.
You can change the ability to view and change the settings in
the Protected Menu. Go to the Protected Menu and scroll
down to Protect Settings. Using the right button, changing
Protect Settings to the O
FF
position allows you to view and
change the settings in the Protected Menu without entering
the passcode. Changing Protect Settings to the O
N
position
hides the protected options and requires entering a passcode
to change the setting in the Protected Menu. After you have
set the passcode, you must turn the key switch off and then
on to enable and save this feature.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle time
between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed Mow
Speed
1. In the Settings Menu, scroll down to Mow Speed and
press the right button.
2. Use the right button to increase the max full mow
speed (50%, 75%, or 100%).
3. Use the center button to decrease the max full mow
speed (50%, 75%, or 100%).
4. Press the left button to exit.
33