Toro 30643, Operator'S Manual

Page: 15 / 72

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Grease the machine.
2
Warning decal 1 Replace the warning decal.
3
No parts required
–
Check the tire pressure.
4
No parts required
–
Check the fluid levels.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Review before operating machine
Engine owner's Manual 1 Use to reference engine information
Parts Catalog 1 Use to reference part numbers
Operator training materials 1 Review before operating machine
Declaration of Conformity 1
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Greasing the Machine
No Parts Required
Procedure
Before operating the machine, grease it to ensure proper
lubricating characteristics; refer to
Greasing the Bearings and
Bushings (page 44) .
Important:
Failure to properly grease the machine will
result in premature failure of critical parts.
2
Replacing the Warning Decal
For CE Models Only
Parts needed for this procedure:
1 Warning decal
Procedure
On machines requiring European CE compliance, replace
the warning decal Part No. 117-2754 with the warning decal
Part No. 117-2766.
15