(Figure 85). Remove damaged or worn grass
deflector.
Figure 85
1. Bolt
5. Spring installed
2. Spacer
6. Grass Deector
3. Locknut
7. L end of spring, place
behind deck edge before
installing bolt
4. Spring
8. J hook end of spring
2. Place spacer and spring onto grass deflector.
Place the L end of spring behind deck edge.
Note:
Make sure the L end of spring is
installed behind deck edge before installing the
bolt as shown in Figure 85.
3. Install bolt and nut. Place the
J
hook end of
spring around grass deflector (Figure 85).
Important:
The grass deflector must be
able to rotate. Lift the deflector up to the
full open position and ensure that it rotates
into the full down position.
56
Summary of Contents for 30433
Page 7: ...Slope Chart 7...
Page 61: ...Schematics Hydraulic Schematic Rev A 61...
Page 62: ...Electrical Schematic Rev A 62...
