Product Overview
1
2
3
4
5
6
G016076
Figure 5
1.
Mower deck
4.
Controls
2.
Brake
5.
Handle
3.
Gas tank
6.
Caster wheel
Controls
Become familiar with all the controls (Figure 6) before
you start the engine and operate the machine.
G016079
Figure 6
1.
Throttle control
6.
Operator Presence
Control levers (OPC)
2.
Speed control lever
7.
Handle
3.
Ignition switch
8.
Drive Lever
4.
Choke
9.
Blade control knob (PTO)
5.
Neutral lock
10.
Fuel shut-off valve
Throttle Control
The throttle control has two positions:
Fast
and
Slow
.
Operator Presence Control (OPC)
Levers
When you squeeze the OPC levers against the handles,
the OPC system senses that the operator is in the
normal operating position. When you release the OPC
levers, the OPC system senses that the operator has left
the normal operating position, and the system will stop
the engine if either the speed control lever is not in the
neutral
position or the blade control (PTO) knob is
engaged.
Blade Control Knob (PTO)
The blade control knob (PTO) is used to engage and
disengage the drive belt to drive the mower blades
with the OPC levers pressed against the handles. Pull
the knob up to engage the blades and push down to
disengage the blades.
11
Summary of Contents for 30069
Page 47: ...Schematics G0161 12 Electrical Schematic Rev A Hydraulic Schematic Rev A 47...
Page 48: ...Notes 48...
Page 49: ...Notes 49...
Page 50: ...Notes 50...
