Toro 29517, Operator'S Manual

Page: 20 / 60

The fourth screen displays the number of hours until
the engine oil maintenance is required.
g212117
Figure 18
The final screen displayed is the number of hours until
transmission oil maintenance is required.
g212118
Figure 19
The Default Screen
After the start-up screens display, the default screen
(
Figure 20 ) appears.
The information screen displays icons and information
relative to machine operation.
g211884
Figure 20
Default Screen
1. Information screen 2. LED status light
•
The safety interlock status indicator illuminates
when the control meets the “safe to start” mode
(park brake engaged).
•
The hour meter displays engine hours when the
hour glass symbol is flashing.
•
The display turns off after 5 minutes after the
ignition key is switched to the
OFF
position.
The Tine Engagement Display
Electronic Depth Control Screen
There are 2 ways to activate the tine engagement
display:
•
Tap the multi-function switch either up or down to
display the tine engagement meter.
•
Step on the tine ground engagement foot switch.
g211731
Figure 21
1. LCD Indicators/Information screen
2. Tine depth status bar
3. Tine depth setting indicator
4. LED status light
A higher number on the status bar ( Figure 21 )
increases the length of the aeration plug and a lower
number decreases it.
Note:
If the plug length is not the desired length, you
may need to adjust the machine to accommodate for
your weight; refer to
Adjusting the Operator Weight
Control Valve (page 47) .
LED Status Light
The LED is multi-colored light ( Figure 20 and Figure
21 ) used to indicate the system status:
•
Solid Green —indicates normal operating activity
•
Blinking Red —indicates an active fault
•
Solid Red —indicates that maintenance is required
20