SUPERCEDED
6
Installing the Actuator
Mount and Rear-Lift
Hardware
Parts needed for this procedure:
1
Pivot pin
1
Locknut (1/2 inch)
1
Actuator mount
2
Carriage bolt (5/16 x 1 inch)
2
Locknut (5/16 inch)
Procedure
1.
Secure the pivot pin to the rear deck-lift arm
using 1 locknut (1/2 inch) as shown in
g346401
Figure 9
1.
Locknut (1/2 inch)
3.
Rear deck-lift arm
2.
Pivot pin
2.
Secure the actuator mount to the left frame tube
using 2 carriage bolts (5/16 x 1 inch) and 2
locknuts (5/16 inch) as shown in
.
g399232
Figure 10
1.
Left frame tube
3.
Locknut (5/16 inch)
2.
Actuator mount
4.
Carriage bolt (5/16 x 1
inch)
6
