Toro 147-1660, Manual

Page: 6 / 52

SUPERCEDED
3
Removing the Existing Left
Motion-Control Lever
No Parts Required
Procedure
Remove the 2 flange-head bolts (3/8 x 1 inch) securing
the existing left motion-control lever and remove the
left motion-control lever (
Figure 5 ).
Retain the 2 flange-head bolts (3/8 x 1 inch) for later
installation.
g345967
Figure 5
4
Removing the Deck-Lift
Spring
No Parts Required
Procedure
1. Remove the spring bolt securing the front of the
deck-lift spring (
Figure 6 ).
2. Remove the shoulder bolt and locknut (1/2 inch)
securing the rear of the deck-lift spring (
Figure
6 ).
3. Remove the deck-lift spring ( Figure 6 ).
g346041
Figure 6
1. Spring bolt 3. Locknut (1/2 inch)
2. Deck-lift spring 4. Shoulder bolt
4