3
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death. Danger, Warning, and Caution are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.
Danger signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
Warning signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Caution signals a hazard that may cause minor or moderate
injury if you do not follow the recommended precautions.
This manual uses 2 other words to highlight information.
Important
calls attention to special mechanical
information and Note: emphasizes general information
worthy of special attention.
Safety
Safe Operation Practices for
Ride-on (Riding) Rotary Lawn
Mowers
Read and understand the contents of this manual before
operating the machine.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
The following instructions are from the CEN standard EN
836:1997.
This product is capable of amputating hands and feet and of
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Training
•
Read the instructions carefully. Be familiar with the
controls and the proper use of the equipment.
•
Never allow children or people unfamiliar with these
instructions to use the lawnmower. Local regulations
can restrict the age of the operator.
•
Never mow while people, especially children, or pets
are nearby.
•
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
•
Do not carry passengers.
•
All drivers should seek and obtain professional and
practical instruction. Such instruction should
emphasize:
–
the need for care and concentration when working
with ride-on machines;
–
control of a ride-on machine sliding on a slope will
not be regained by the application of the brake. The
main reasons for loss of control are:
•
insufficient wheel grip;
•
being driven too fast;
•
inadequate braking;
•
the type of machine is unsuitable for its task;
•
lack of awareness of the effect of ground
conditions, especially slopes;
•
incorrect hitching and load distribution.
Preparation
•
While mowing, always wear substantial footwear and
long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
•
Thoroughly inspect the area where the equipment is to
be used and remove all objects which may be thrown by
the machine.
•
Warning—Fuel is highly flammable.
–
Store fuel in containers specifically designed for this
purpose.
–
Refuel outdoors only and do not smoke while
refuelling.
–
Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine
is running or when the engine is hot.
–
If fuel is spilled, do not attempt to start the engine
but move the machine away from the area of
spillage and avoid creating any source of ignition
until fuel vapors have dissipated.
–
Replace all fuel tanks and container caps securely.
•
Replace faulty silencers.
•
Before using, always visually inspect to see that the
blade, blade bolt and cutter assembly are not worn or
damaged.
