12
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
Controls
Become familiar with the controls before you start the
engine and operate the machine.
Using the Parking Brake
Always set the parking brake whenever you stop the
machine or leave it unattended.
Setting the Parking Brake
1. Push the brake pedal (Fig. 2) down and hold it.
1
2
Figure 2
1.
Brake pedal
2.
Parking brake lever
2. Lift the parking brake lever (Fig. 2) up and gradually
take your foot off of the brake pedal.
Note: The brake pedal should stay in the depressed
(locked) position.
Releasing the Parking Brake
1. Push down on the brake pedal (Fig. 2) and hold it.
2. Push the parking brake lever (Fig. 2) down and
gradually release the brake pedal.
Positioning the Seat
The seat can move forward and backward. Position the seat
where you have the best control of the machine and are
most comfortable.
1. Raise the seat and loosen the 4 bolts (Fig. 3).
m-5951a
1
Figure 3
1.
Bolt (4)
2. Move the seat to the desired position and tighten the
bolts.
Using the Blade Control (PTO)
The blade control (PTO) lever engages and disengages
power to the blade.
Engaging the Blade
1. Depress the brake pedal to stop the machine.
2. Slowly shift the blade control (PTO) to Engage (Fig. 4).
1
2
3
Figure 4
1.
Disengage
2.
Engage
3.
Blade control (PTO)
