Controls
Control Panel
g027586
Figure 7
1.
Steering wheel
5.
Accelerator pedal
2.
Cup holder
6.
Parking-brake handle
(center console)
3.
Passenger handhold
7.
Operator's Manual
storage
tube
4.
Brake pedal
Accelerator Pedal
Use the accelerator pedal (
) to vary the
ground speed of the machine. Pressing down the
accelerator pedal starts the engine. Pressing the
pedal farther increases the ground speed. Releasing
the pedal slows the machine, and the engine shuts off.
Note:
The maximum forward speed is 26 km/h
(16 mph).
Brake Pedal
Use the brake pedal to stop or slow the machine
(
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal
injury.
If the brake pedal travels to within 25 mm (1
inch) of the machine floor board, adjust or
repair the brakes.
Parking-Brake Lever
The parking-brake lever is located between the seats
(
and
). Whenever you shut off the
engine, engage the parking brake to prevent the
machine from accidentally moving. To engage the
parking brake, pull up the parking-brake lever. To
disengage the parking brake, push the lever down.
Gear-Shift Selector
The gear-shift selector is located between the seats
and below the parking-brake lever. The gear-shift
selector has 3 positions: F
ORWARD
, R
EVERSE
, and
N
EUTRAL
(
Note:
The engine starts and runs in any of the 3
positions.
Important:
Always stop the machine before
changing gears.
Horn Button
TC Models Only
The horn button is located at the lower, left corner of
the dash panel (
). Press the horn button to
sound the horn.
g027587
Figure 8
1.
Horn button (TC Models
only)
6.
Engine
coolant-temperature light
2.
Hour meter
7.
Glow plug indicator light
3.
Light switch
8.
Key switch
4.
Battery light
9.
Power point
5.
Engine oil-pressure light
11
Summary of Contents for 07236
Page 49: ...Notes...