Accessing the Hood
Raising the Hood
1.
Lift up the handle of the rubber latches on each
side of the hood (
).
g312721
Figure 21
2.
Raise the hood.
Closing the Hood
1.
Gently lower the hood.
2.
Secure the hood by aligning the rubber latches
onto the latch anchors on each side of the hood
(
).
Lubrication
Greasing the Machine
Service Interval:
Every 100 hours/Yearly (whichever
comes first)—Grease the bearings
and bushings. Grease the machine
more frequently when using it for
heavy-duty operations.
Grease Type:
No. 2 lithium grease
1.
Use a rag to wipe the grease fitting clean so that
foreign matter cannot be forced into the bearing
or bushing.
2.
With a grease gun, apply 1 or 2 pumps of grease
into the grease fittings on the machine.
3.
Wipe the excess grease off the machine.
The grease fittings are located at the inner end of the
control arms, the tie-rod ball joint, and the outer end
of the control arms (
and
).
g033044
Figure 22
g033217
Figure 23
27
Summary of Contents for 07236
Page 49: ...Notes...
