Toro 07068, Operator'S Manual

Page: 10 / 36

3
Installing the Hitch Tongue
Parts needed for this procedure:
1 Hitch tongue
1 Hitch pin
1 Bolt (3/8 x 1-1/4 inch)
1 Nut (3/8-16)
1 Large washer
1 Large nut
1 Square-head set screw
Procedure
Note:
This procedure requires 2 people.
1. Insert the rear end of the hitch tongue between the
mounting plates on the sweeper while aligning the
mounting holes (
Figure 3 ).
Note:
The hose guides are to be positioned on top
of hitch tongue.
2. Insert the hitch pin through the mounting plates and
the hitch tongue (
Figure 3 ).
3. Secure the top of the hitch pin to the mounting plate
with a bolt (3/8 x 1-1/4 inch) and a locknut (3/8 inch)
(
Figure 3 ).
4. Secure the bottom of the hitch pin with a large washer,
large nut and square-head set screw (
Figure 3 ).
Figure 3
1. Hitch tongue 4. Large nut and square-head set screw
2. Hitch pin 5. Large washer
3. Bolt (3/8 x 1–1/4 inch) and locknut (3/8 inch)
10