##
Kawasaki, air cooled, overhead valve, 4 cycle,
3.7 horsepower, 2.36" x 1.73" bore and stroke, 7.57 cu.
in. (124 cc) displacement, 8.4:1 compression ratio, 11
ft. lbs. @ 1400 rpm. Electronic ignition, maximum noise
suppression muffler. 2.64 quart fuel tank capacity.
')$# '+
Engine to countershaft drive: two A"
section VĆbelts. Countershaft to differential drive: 5 mm
pitch timing belt. Differential to drum drive: 8 mm pitch
timing belt.
'#)!
Peerless Series 100.
'#(%$') !*)
Belt idler
'
Band drum
'#(%$') '(
Quick detachable, 3.00/3.25 x 6, 32.5
tread width.
')$# '*"
Dimpled dual cast aluminum, 7.5" dia.
$#)'$!(
Engine has recoil starter, ON/OFF switch
and choke. Handle has throttle lever, traction engage
lever and service/ park brake lever. Mower has reel
drive engage lever. Safety devices: neutral interlock
system.
#!
Loop style,1" dia.
! $#()'*)$#
5" diameter, 8 carbon steel blades
welded to 6 stamped steel spiders.
) $ *)
26"
) $ *) #
1/8" to 1-1/4"
!%
.23"
! !*)
Jaw Type.
# # '
Single edged high carbon steel
bedknife, hardened to Rc 48Ć54. Fastened to
machined, cast iron bedbar. 1/8" bedknife (Part No.
93-9015), standard.
'(( ( )
Molded polyethylene.
"#($#(
Width:
41"
Height:
41-1/2"
Length:
54-1/4"
Dry Weight: 229 lbs. with basket and Wiehle roller,
without wheels or grooming reel.
%)$#! &*%"#)
Light Kit
Model No. 04059
Tournament Bedknife
Part No. 94-5885
Operator Presence Kit
Part No. 93-9010
Clip Kit
Part No. 65-9000
Height-of-Cut Bar
Part No. 94-9010
Spark Arrester
Part No. 94-9101
Full Roller
Part No. 95-0930
High Altitude Jet (For altitudes of 3000 to 6000 ft.)
Part No. 98-8735
High Altitude Jet (for altitudes above 60000 ft.)
Part No. 98-8736
$)
Use this chart as a checklist to ensure all parts necessary for assembly have been shipped. If any of these
parts are missing, total set-up cannot be completed.
('%)$#
),
(
Handle Assembly
1
Mount handle to machine.
Cable Ties
2
Secure control cables to handles.
Transport Wheels
2
R.H. Wheel Shaft
1
Mount wheels to machine.
L.H. Wheel Shaft
1
Grass Basket
1
Install on machine.
Operator's Manual
1
Read before operating machine.
Engine Manual
1
Read before operating machine.
Parts Catalog
1
Registration Card
1
Fill out and return to Toro.
