INSTALLATION − DECO 20a / DEC0 26a / DECO 20e / DECO 26e
300561 en − 05/08
Chap. 2.3.1 /1
2.
UNPACKING − CLEANING
2.1
PACKING LATHE FOR TRANSPORT
What to do ?
Notes
−
Pack in a case ...
or
−
Pack on a board ...
... for overseas or special trans-
ports.
... for continental transport.
Note :
The invoiced packing items are property of the customer.
2.1.1 Handling Equipment
No handling equipment is provided for single-spindle automatics.
2.2
UNPACKING LATHE
Note :
Whenever you move the lathe about, proceed according to the
TRANSPORT INFO Sheet 300551 included in the machine’s docu-
mentation.
What to do ?
Notes
−
Pull out nails from the cover and
then from the walls of the case.
−
Remove the vacuum-packing
plastic.
−
Remove the wooden wedges
and ropes ...
... that hold various items.
2.3
CLEANING LATHE
2.3.1 Cleaning Lathe after Unpacking
Note :
For certain destinations the machine is rust-protected.
What to do ?
Notes
−
Wash carefully with gasoline or
petroleum-soaked cloth all rust-
protected surfaces.
Δ
Attention !
Wash on well ventilated prem-
ises only to avoid inhaling toxic
vapors !
Δ
Caution !
Do not damage or disrupt any-
thing.
Δ
Avoid using compressed air and
substances that could damage
plastic materials.
