15
MACHINE PREPARATION
RECOVERY TANK PREPARATION & PLASTIC BAG HOLDER
TREATING YOUR RECOVERY TANK
Your scrubber has been designed with a debris tray. The unit also utilizes Bromine tablets, typically used in
pools and spas, to kill the bacteria in the tank that cause odors.
1. Lift the recovery tank lid to the open position and locate the debris tray.
2. Lift the debris tray out and turn it over so that you are able to pinch the two tabs protruding from the
underside of the debris tray together to release the Bromine tablet holder.
3. Check the size of the Bromine tablet. Replace the Bromine tablet when it is approximately 25% of it’s
original size.
4. Press the bromine tablet back into the debris tray.
CAUTION: Use Bromine only! Do not use chlorine. Chlorine can interact with ammonia based detergents
to cause harmful fumes.
PICKING UP LARGER DEBRIS DURING THE CLEANING PROCESS
Your scrubber has been designed with two hooks molded into the handle that
can be used to hang a plastic bag to put larger pieces of debris that you come
across during the cleaning process or that obstruct the squeegee assembly and
cause streaking. Simply slide a handle of the plastic bag over each of the hooks.
MACHINE OPERATION
OPERATIONAL CONTROLS
TURNING THE UNIT ON/OFF
The machine is powered on through a key switch on the upper control
panel. Turn the key to the ON position. You will see the battery meter
on the left side of the upper control panel light up to show the battery
charge level.
The key switch is a proven way to eliminate unwanted operation. Simply
remove the key and safely store it away when you have completed
scrubbing.
Key switch shown above
Plastic bag hooks indicated
above
1
Press the bromine tablet back
into the debris tray
4
Check the bromine tablet
3
Remove the debris tray
2
The Bromine tablet holder is
located in the debris tray inside
the recovery tank
1
Summary of Contents for Floorkeeper 28 OB/99128OB
Page 3: ...3 NOTES...
