background image

5

WARNING! To reduce the risk of electric shock, fire, or injury:

Your new Tornado unit is a high quality, precision-made product. All parts used in the manufacturing of 

this unit have passed rigid quality control standards prior to assembly. Please safeguard the original receipt 

/ invoice. If you experience any problems with your unit during the warranty period, the original receipt / 

invoice will act as proof of purchase. Contact Tornado for any warranty inquiries.

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS UNIT

Read and understand this owner’s manual and all labels on the unit before operating. Safety is a 

combination of common sense,staying alert and knowing how your unit works. Use this unit only as 

described in this manual. Use only manufacturer’s recommended attachments. To reduce the risk of personal 

injury or damage to your unit use only Tornado recommended accessories.

SAFETY INSTRUCTIONS

These guidelines are provided for your protection and convenience. Please read them carefully. If you have 

any questions regarding the use of your equipment call Technical Service at 800.533.2557. Failure to adhere 

to instructions provided can potentially void any warranties. Precautions and safety warnings are provided 

for your protection. Failure to observe these warnings could result in personal injury and damage to the 

equipment. When using an electrical appliance, basic safety precautions should always be followed.

WARNING! Do not attach any device that would engage the trigger in the on position.

1. This machine should only be used by trained and authorized personnel. Operators must read and 

understand this manual completely and view the training video before operating the equipment.

2. Do not leave unit unattended when plugged in when not in use. Always unplug the equipment from 

outlet when not in use and before servicing.

3. Connect to a properly grounded outlet only. (See Grounding Instructions)

4. Do not use with damaged cord or plug.

5. Do not handle plug or unit with wet hands.

6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or

corners. Do not run machine over cord. Keep cord away from heated surfaces.

7. Turn off all controls before unplugging.

8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, 

and anything that may reduce air flow.

10. Do not use without filters in place.

11. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may 

be present.

12. Do not expose to rain. Store indoors.

13. If unit is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take 

it to a local 

service center.

Summary of Contents for CASCADE 20SP 98856





















Reviews: