9
Transporting the Cascade
To transport the Cascade from one location to another, it is recommended that the complete tool head be
removed.
1. Disconnect vac hose and solution line from cleaning head.
2. Remove two quick release pins.
3. Unscrew the 4 screws on the side of the tool head.
4. Remove the tool head from the machine.
5. Replace the tool head when machine is set up at new location.
Preparing for Cleaning
Planning
The area to be cleaned should be reviewed to determine the most efficient cleaning plan to minimize turns
and utilize power outlets advantageously.
If you have a rectangular room:
• Establish a path down the length of the room, overlapping each pass by a minimum of 2 inches.
If you have an irregularly shaped room:
• Establish a path down the length of the room at the longest point, overlapping each pass by a minimum of
2 inches.
Vacuuming
Vacuuming is very important to the maintenance of carpet. Vacuuming removes the dry soil; loose dust,
dirt and soil before it is worked down into the carpet. Built up soil is much more difficult to clean out of the
carpet.
Pre-Spraying
Doorways and other heavy traffic areas will require additional maintenance and care. Pre-spraying these
areas prior to cleaning will allow the chemicals additional time to work.
Spotting
The difference between a spot and a stain is how long it sits on the floor. Pre-vacuuming provides an
excellent opportunity to locate and pre-treat spots
