13
What To Do When You’re Operating Machine
(20” & 24” EZ Traction Drive)
1 Stand behind the machine.
2 Make sure the brush drive motor switch is ON.
3 Lower the brush deck as described.
4 Pull up on the Control bar under the drive handle.
The machine will start to move forward in a straight line.
To go backward turn the speed knob on the control panel
counter-clockwise.
How To Steer the Machine
The machine is very easy to steer. Just point the machine in
the direction you want to go. At the end of a long hallway or
aisle, go slow and stand a bit to the side of machine as you
turn it around. NEVER let go of the machine.
Vacuuming Up Solution
1
Make sure the squeegee is in the down position.
2
As the machine moves forward and the solution
is dispensed, the squeegee will vacuum it up
into the recovery tank.
3
If necessary, adjust squeegee pressure by
turning knob.
If solution is missed, reduce the amount of solution flow
and move the machine back over the missed area. You can
go forward or backward and pick up solution.
How To Control Excess Foam in Recovery Tank
Watch the liquid as it accumulates in the recovery tank. If
you notice excess foaming, stop the machine. Add a small
amount of chemical defoamer in the recovery tank.
Summary of Contents for 99105A
Page 5: ...5 ...
