91
Mount the tool in the jig pro-
truding approx. 100 mm (4").
The stop ring (4) must be locked
close to the sleeve (2).
Turn the jig so one wing lies flat
on the grindstone. Set the jig so
that the edge is approximately
parallel to the axis of the stone.
Now the jig is set to suit the
shape of the tool, the edge
angle will be uniform.
Setting the jig
Setting the edge angle
Control the grinding pressure with your thumb and control where the grinding takes place by gently
turning the tool with your hand. Check frequently where the grinding is taking place. Only grind
where the line of light is the thickest. Do not slide the tool sideways. Keep it on the same spot on
the grindstone for the best control. Rest your hands on the Universal Support all the time and you
get a good control.
Grinding
Set the edge angle by adjusting
the Universal Support. When
replicating an existing angle,
use the Marker Method. When
setting a new angle you can
use the AngleMaster.
