Tormatic TAD MS 230V, Assembly And Operating Instructions Manual

Page: 24 / 128

22 - EN TAD MS 400V / 230V
Safety devices and protective systems
• Main switch
By means of the main switch, all poles of the control and the
controlled door system can be separated from the mains.
• Emergency stop switch
By means of the emergency stop button connected, the
movement of the controlled door system and loading bridge
is stopped.
CAUTION
Tripping or falling hazard when loading!
With the control switched off, triggered emer-
gency stop switch or active restart lock, the float-
ing position of the loading bridge is not active
and the vertical movements of the truck are not
balanced out.
•
It is not permitted to drive on the loading
bridge until restart.
How to respond after the emergency
• Main switch
Set the switched off main switch to position "I" (On) after
having resolved the emergency.
• Emergency stop switch
If an emergency stop switch has been connected by the
customer, you have to unlock it according to the
manufacturer's information after having resolved the
emergency.
Further safety devices such as light grids, photoelectric sensors
or safety edges can be connected. The personnel must be in-
structed with regard to the exact configuration and its function.
3 Product description
Control elements
10
1
2
3
4
7
6
9
5
8
11
1 LED display 6 RETURN loading bridge
button
2 Door OPEN button 7 Housing cover
3 HALT button 8 LIFT loading bridge button
4 Door CLOSE button 9 Main switch
5 Support button 10 AUTO button
11 green LED illuminated:
active button
green LED not illuminated:
inactive button
(applies to all buttons)
Programming control elements
3
4
1
2
5
1 LED display 3 Up navigation button
2 LED spot (confirmation of
the programming entry)
4 Down navigation button
5 Programming button (Prog
button)