PowerSlide 16
ENGLISH
2 4
5.5
10
2 5
1
2
17
0
1
2
3
4
5
6
40
Nm
2 6
1.5
1
2
2 7
5.7 ADJUSTMENTS AND CHECKS
RISKS
PERSONAL PROTECTIVE EQUIPMENT
L
i
The operations described in this section are fundamentally important
to the integrity and operation of the gear motor.
1. When you have installed the rack, lower the gear motor by 1.5mm
(
2 6
-1), using the four support nuts (
2 7
-1).
2. Check that the gear motor is level using a spirit level (
2 7
).
3. Tighten the four upper locknuts to a minimum torque of 40Nm
(
2 7
-2), using a hex spanner and a torque wrench.
4. Move the gate by hand and check that:
-
There is 1.5 mm between the teeth of the rack and pinion along
the travel
-
The rack remains engaged with the pinion along its travel
(
2 6
-2)
-
The sliding gate section and gear motor do not touch at any point
-
There is no friction.
Summary of Contents for POWERSLIDE
