MOUNT THE CONSOLE
Assemble the Controller and Keyboard Tray
1. Find the three provided split collars. If they're connected, remove their bolts using a 8 mm hex wrench, and
separate them. The split collars are matched pairs, so you must keep them together.
Figure 7: One split collar disassembled.
2. Find the four provided pieces of plastic with adhesive backing. Cut each piece of plastic so that it's the length
of the inside of the split collar.
3. Adhere one piece of plastic to the inside of each split collar.
Figure 8: Adhering tape on the inside of a split collar.
4. Remove the operator console out of its packaging.
Page 8
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10715: Installation Guide: PathPilot Operator Console for 770 (0822A)
