MOUNT THE CONSOLE
7. Attach the threaded side of two split collars to the mount arm brackets with four M5 × 0.8 - 10 screws and
washers.
Figure 11: Split collars attached to the mount arm brackets on the controller.
8. Find the keyboard tray provided. Then, attach the remaining mount arm bracket to the left side of the
keyboard tray with two M4 × 0.7 - 10 screws using a 2.5 mm hex wrench. Verify that the curved edge is
facing away from the keyboard tray.
9. Attach one side of one split collar to the mount arm bracket with two M5 × 0.8 - 10 screws and washers.
Figure 12: Split collar attached to the mount arm bracket on the keyboard tray.
10. Find the provided jog pendant bracket. Then, attach it to the left side of the controller (between the two
mount arm brackets) with two M4 × 0.7 - 10 screws using a 2.5 mm hex wrench.
Page 10
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10715: Installation Guide: PathPilot Operator Console for 770 (0822A)
