TECHNICAL DOCUMENT
2. Lift the ATC main assembly on to the mounting bracket.
Figure 6: ATC main assembly positioned above the mounting bracket.
3. Align the locating pin on the ATC main assembly with the matching hole in the mounting bracket.
4. Secure the ATC main assembly to the mounting bracket with the four M8 × 1.25 - 16 mm socket head cap
screws and washers that you set aside in Step 1.
Level the Automatic Tool Changer (ATC)
This section gives instructions to roughly level the ATC on the machine by using a long, straight rod. More
adjustments are made later in the installation procedure.
NOTICE!
After the initial installation, you must level the ATC. If you don't, there's a risk of machine damage.
Complete the following steps in the order listed:
Examine Perpendicularity in the Y Direction
Examine Perpendicularity in the X Direction
Examine the Alignment of the Carousel Door Opening
Page 9
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)