TECHNICAL DOCUMENT
4. From the
ATC
tab, select
ATC FWD
or
ATC REV
.
Figure 4: ATC REV and ATC FWD buttons on the ATC tab.
The tray moves to the next location and fetches another tool.
5. Select
Retract
.
The tray returns to the machining position.
Load a Tool into the Spindle
Load a tool into the spindle:
1. Push and hold the drawbar open button on the side of the ATC.
Figure 5: Drawbar open button on the side of the ATC.
The drawbar opens.
2. Load a tool into the spindle.
3. Release the button.
The drawbar closes.
Page 24
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)
