TECHNICAL DOCUMENT
IMPORTANT!
Please read this section before you begin installing your Automatic Tool Changer (ATC).
l
PathPilot
You must update your controller to the latest version of PathPilot before installing and
operating the ATC. If you don't, there's a risk that the ATC could become inoperable. Follow the
instructions detailed in "Before You Begin" (on the next page).
LOOKING FOR A VIDEO?
Before you begin, select the image below to watch a walk-through video of this entire installation
procedure.
PURPOSE
This document gives instructions on installing and using an Automatic Tool Changer (ATC) for 770MX.
PRODUCT INFORMATION
Product:
Automatic Tool Changer (ATC) for 770MX (PN 39290)
The Automatic Tool Changer (ATC) holds up to 10 tools in a single tray. If your program requires more tools, the
ATC changes tools automatically for all tools assigned to the tray, and pauses for a manual tool change for all tools
not assigned to the tray.
Note:
If any items are missing, we can help. Email
to contact Tormach Technical
Support for guidance on how to proceed.
Page 2
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)
