Torklift central X7910 Installation Instructions Manual Download Page 19

 

 

Page 
18

 

 

 

 

WARRANTY/DISCLAIMER 

INFORMATION 

Torklift Central requires proof of purchase for warranty claim 
registration, with pictures of any defective product before issuing a 
replacement. Torklift will not accept claims on any product without 
proof of purchase, which can be faxed, scanned, emailed or mailed to 
the information provided below. Torklift Central warrants its hitches, 
custom hitch receivers and accessories (excluding electrical wire 
harnesses which carry a warranty from their specified manufacturer) 
from date of purchase against defects in material and workmanship 
under normal use and service for the ownership life of the original 
consumer purchaser. Torklift Central will replace free of charge any 
part that proves defective in material or workmanship when presented 
to Torklift Central, transportation charges prepaid by purchaser, at the 
address below. 

 

This warranty is limited to defective parts 

replacement only. Labor charges and/or damage 
incurred in installation or replacement, as well as 
incidental and consequential damages connected 
therewith are excluded

  

This warranty does not include normal wear and tear or the 

finish and paint. Rusting, cracking or peeling of the finish is also 
excluded. Some states do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitation or 
exclusion may not apply to you. Any damage to Torklift Central 
products as a result of misuse, abuse, neglect, accident, improper 
installation or any use violative of instructions furnished by Torklift 
Central will void the warranty. This warranty gives you specific legal 
rights and you may also have rights, which vary from state to state. 
With warranty service, you may be able to go to a small claims court, 
a state court or a federal district court. 
 
 
 
 
 
 

Summary of Contents for X7910





















Reviews: