Page 9
Step 6A:
Vehicles equipped with vertical frame brackets.
(For vehicles not equipped with Vertical Frame Brackets, proceed
to Step 6B)
•
Insert one 5/8”-11 x 4” Grade 8 hex bolt with one 5/8” SAE flat
washer into each of the two lower rear holes in a Side Plate.
•
Place a side plate spacer over the threaded ends of the bolts, then
guide the bolts into the frame. See figure 6A.1.
•
Secure each bolt with one 5/8” SAE flat washer, one 5/8” split
lock washer, and a 5/8”-11 grade 8 hex nut. Leave the hardware
as loose as possible. Repeat for the opposite side of the frame.
Proceed to Step 7.
Figure 6A.1
–
Driver side shown
5/8” SAE
Flat Washer
5/8”
-
11 x 4”
Grade 8 Hex Bolt
5/8” SAE
Flat Washer
5/8” Lock
Washer
5/8”
-11 Grade
8 Hex Nut
