11
TO ADD JACK OIL
The hydraulic cylinder assembly contains hydraulic
fluid that must be kept at approximately 80% full at all times for proper operation. To check the level and to fill
remove oil filler plug.
2. Locate and remove oil filler plug.
1. Position the jack on level ground and lower the
saddle in the upright position. Open release valve
by turning handle counter-clockwise (4 full turns).
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
4. Replace oil plug.
5. Perform the Air Purge Procedure.
4
7
Summary of Contents for TR4053
Page 14: ...14 ASSEMBLY DIAGRAM...
Page 31: ...31 SCH MA DE MONTAGE...
Page 48: ...48 DIAGRAMA DE ENSAMBLAJE...
