Instruction Manual - TORBAL DRX 5 Series
4. Wait for the weight to stabilize and press the T key to tare.
5. Once the scale has finished taring, “SCAN” will appear on the display, indicating that it is ready to scan the NDC
code associated with the drug.
6. Note: If NDC verification has been enabled, two NDC codes must be scanned to allow the scale to check for a
match between the two codes. For more information on NDC verification please turn to Chapter 15 of this
manual.
7. Scan the NDC code by slowly placing it under the scanner light.
8. If the Remaining to Fill feature has been enabled, the scale will ask for the number of pills to be counted in the
transaction. Using the scale’s keypad or an external keyboard, key in the number of pills you wish to count and
press Enter.
9. The display will then indicate to begin filling. The word “FILL” will flash on the display for approximately five
seconds. At any time during the Fill command, press the sigma key ( ) to modify the data associated with the
drug.
52
