4.1-
GENERAL NOTES
THE OPERATIVE PERSONNEL MUST BE AWARE OF THE ACCIDENT RISKS, OF THE
SECURITY SYSTEM FOR THE OPERATORS, THE GENERAL RULES TO PREVENT
ACCIDENTS PROVIDED BY THE INTERNATIONAL DIRECTIVES AND BY THE LAW IN
FORCE IN THE COUNTRY WHERE THE FEEDING UNIT IS USED, THE BEHAVIOUR OF
THE OPERATIVE PERSONNEL, IN ANY CASE, MUST BE STRICTLY IN COMPLY WITH
THE RULES ON THE ACCIDENT PREVENTION IN FORCE IN THE COUNTRY WHERE
THE UNIT IS USED.
DO NOT REMOVE OR CHANGE THE PLATES STICKED BY THE MANUFACTURER ON
THE FEEDING UNIT.
IN CASE THE WINDOWS FRAME IS ACCESSIBLE OR INSTALLED TO A HIGH INFERIOR
TO 2.5m IF IT CAN BE CONTROLLED BY REMOT CONTROL OR BY USERS NOT
Q U A L I F I E D , P R O V I D E T H E S Y S T E M W I T H A N E M E R G E N C Y S TO P, T H AT
AUTOMATICALLY INTERVENES TO AVOID THE RISK TO CRUSH OR DRAG PARTS OF
THE BODY LOCATED BETWEEN THE MOVING AND THE FIXING PARTS OF THE
WINDOW FRAMES.
4.2-
PROTECTIONS AGAINST ELECTRIC HAZARD
The device is protected against electric hazard due to direct and indirect contacts.
The protection measures against direct contacts aim at protecting people against
hazards due to contact with active parts, usually live parts; while the protection
measures against indirect contacts aim at protecting people against hazards due to
conducing part, which are usually insulated, but could become live in case of failure
(insulation failure).
The adopted protection measures are the following:
1)
Insulation of live parts by means of a plastic material body;
2)
Enclosure with suitable protection degree;
3)
Protection of passive type given by the use of components with double insulation,
also called components of class II or with equivalent insulation (it is forbidden to
perform the connection to the earthing plant of the devices equipped with double
insulation).
4.3-
PLATES RELATING TO SAFETY
IT IS FORBIDDEN TO MOVE, DAMAGE OR MAKE LESS VISIBLE THE PLATES
RELATED TO THE SECURITY OF THE FEEDING UNIT. THE LACK OF COMPLIANCE
WITH THE ABOVE MAY SERIOUSLY DAMAGE PEOPLE OR THINGS.
THE MANUFACTORER IS NOT RESPONSIBLE FOR ANY DEMAGE CAUSED BY THE
NOT COMPLIANCE WITH THIS WARNING.
10
INSTALLATION AND USE INSTRUCTIONS
TF24R/44R
SAFETY -4
Summary of Contents for TF24R
Page 27: ...INSTALLATION AND USE INSTRUCTIONS ...
Page 51: ......
